Table of Contents
Centauri user manual revision level 01 /2007
47
5.1.20. Display Hardware Equipment at Program Start
After the program starts, the remote control software automatically displays the hardware
equipment available in the MERK II if the corresponding option has been set. To switch the
display option on and off, proceed as follows:
•
Select
EXPERT
OPTIONS
in the remote control software
.
The following dialog window
opens:
Figure 52:
The
OPTIONS
dialog window
•
Click the control box next to “Show Hardware Status at Start”, a tick in the control box
means “display on”, no tick means “display off”.
•
To make the setting effective, click on “OK”.
