Table of Contents
Centauri user manual revision level 01 /2007
41
5.1.11. Switch Dual Mode On/Off
Dual Mode must be switched on if bilingual sound is to be transmitted or if a completely
separate transmission is to be made to different destinations over two channels. To switch
Dual Mode on or off, proceed as follows:
(a) Via the front panel:
•
Select the
SETUP
option in the Start mask (see
Figure 4
). The Setup mask appears.
•
Select
MISCELLANEOUS
and press
The
MISC
mask appears.
Figure 41:
The
MISC
mask
•
Select
DUALMODE
with the
and
keys and press
.
•
Enter the desired value with the
and
keys and press
.
•
To end press the key.
(b) Via the remote control software:
•
To switch the Dual Mode on or off, select
SETTINGS
OTHERS
in the remote control
software. The following dialog window opens:
Figure 42:
Additional settings
•
Select the desired value under “Dual Mode at B-channel”.
•
To make the new value effective, click on “OK”.
For Dual Mode only mono and sample rates <= 32 kHz can be used.
