Table of Contents
Centauri user manual revision level 01 /2007
33
5.1.4.
Set Communication Interface
You can determine via which communication interface a connection is to be established.
The following are available
–
ISDN,
–
Loop (for test purposes) and when the MERK II is correspondingly configured,
–
NET
To set the communication interface, proceed as follows:
(a) Via the front panel:
•
Select the
SETUP
option in the Start mask (see
Figure 4
). The Setup mask appears.
•
Select
COMMUNICATION INTERFACE
and press
. The following mask appears:
Figure 27:
The
COMMUNICATION INTERFACE
mask
•
Press
.
•
Select the desired communication interface with the help of the
and
keys and
press
•
End the setting by pressing .
(b) Via the remote control software:
With the remote control software the communication interfaces and if necessary the
network address are selected in the “Connect” dialog (see also section "Set up
Connection").
Figure 28:
The
CONNECT
dialog window with different selected interfaces
