Maipu SM6600-04-MF, Руководство по установке

Страница: 172 / 174

Installation Preparations MyPower S6600 Series Routing Switch Installation Manual
4
copyright
©
2015 Maipu All rights reserved.
A
A A
A
P P E N D I X
P P E N D I X P P E N D I X
P P E N D I X F I G U R E
F I G U R E F I G U R E
F I G U R E
F
F F
F 5
5 5
5 T
T T
T
H E
H E H E
H E
4
4 4
4
D I A G R A M
D I A G R A M D I A G R A M
D I A G R A M O F
O F O F
O F T H E
T H E T H E
T H E C A B L E
C A B L E C A B L E
C A B L E F A S T E N I N G
F A S T E N I N G F A S T E N I N G
F A S T E N I N G
1. Flat gasket 2. Cable 3. Flat gasket
4. Spring cushion 5. Nut 6. Thread bolt
� The harder power cable should be fastened around the terminal conjunction to
prevent generating stress on terminal conjunction and cable.
� Do not use self-tapping screw to fasten the wiring terminal.
� The power cable of the same type and same direction should be bound to the
cable bunch. The cables in the cable bunch should be clean and straight. The
cable tie binding should be conducted as follows:
A A A A
P P E N D I X P P E N D I X P P E N D I X P P E N D I X T A B L E T A B L E T A B L E T A B L E
F F F F 1 1 1 1 T T T T
H E H E H E H E C A B L E C A B L E C A B L E C A B L E T I E T I E T I E T I E B I N D I N G B I N D I N G B I N D I N G B I N D I N G C O M P A R I S O N C O M P A R I S O N C O M P A R I S O N C O M P A R I S O N T A B L E T A B L E T A B L E T A B L E
Cable
Cable Cable
Cable Bunch
Bunch Bunch
Bunch Diameter
Diameter Diameter
Diameter (mm)
(mm) (mm)
(mm) Binding
Binding Binding
Binding Space
Space Space
Space (mm)
(mm) (mm)
(mm)
10 80–150
10–30 150–200
40 200–300
� No cable wiring or binding should be crossed with each other.
� For the wiring terminal socket of the crimping cold-pressure terminal type
(such as air switch), the metal part of the cold-pressure terminal cannot be
exposed to the external terminal socket when assembling.