Maipu SM6600-04-MF, Руководство по установке

Страница: 153 / 174

MyPower S6600 Series Routing Switch Installation Manual
Installation Preparations
copyright
©
2015 Maipu All rights reserved. 1
D D D D Device Device Device Device Running Running Running Running Environment Environment Environment Environment Requirement Requirement Requirement Requirement
D1 D1 D1 D1 Environment Environment Environment Environment Requirement Requirement Requirement Requirement of of of of Equipment Equipment Equipment Equipment Room Room Room Room
D1.1 D1.1 D1.1 D1.1 Building Building Building Building Requirement Requirement Requirement Requirement of of of of Equipment Equipment Equipment Equipment Room Room Room Room
It is recommended that the equipment room adopts the anti-static floor, which is
dust-free. It is required to lay the static floor. The laying of the floor plate should
be tight and sturdy and the level error per square meter should be less than 2mm.
When there is no raised floor, lay the static conductive ground material (the
volume resistivity should be 1.0×107 Ω*m-1.0×1010 Ω*m). The static
conductive ground material or raised floor should be static grounding. We can
use the current limiting resistor and connection line to connect with the
grounding device. The resistance of the current limiting resistor is 1MΩ.
D1.2
D1.2
D1.2 D1.2 Temperature
Temperature
Temperature Temperature Requirement
Requirement
Requirement Requirement
To ensure that the device can work normally, it is recommended to maintain a
certain temperature in the equipment room. The detailed requirement is
described in the following table.
A
A A
A
P P E N D I X
P P E N D I X
P P E N D I X P P E N D I X T A B L E
T A B L E
T A B L E T A B L E
D
D D
D 1
1 1
1 W
W W
W
O R K
O R K
O R K O R K E N V I R O N M E N T
E N V I R O N M E N T
E N V I R O N M E N T E N V I R O N M E N T T E M P E R A T U R E
T E M P E R A T U R E
T E M P E R A T U R E T E M P E R A T U R E R E Q U I R E M E N T
R E Q U I R E M E N T
R E Q U I R E M E N T R E Q U I R E M E N T
Description Description Description Description Temperature Temperature Temperature Temperature
Storage temperature -40°C–70°C
Long-term work condition 0°C–40°C
Short-term work condition –5°C–45°C
� If the temperature is too high, the reliability of the device reduces greatly. The
long-time high temperature affects the life and speeds up the aging of
insulation materials.
� When the device enters the high-temperature environment from the
low-temperature environment and if there is condensed water on the device,
be sure to take some measures (such as drying and airing) before the device
is powered on, so as to prevent the internal components of the device from
short-circuit and being burned.