MyPower S6600 Series Routing Switch Installation Manual
Installation Preparations
copyright
©
2015 Maipu All rights reserved.
11
F
F
F
F
I G U R E
I G U R E
I G U R E
I G U R E
6
6
6
6
1 7
1 7
1 7
1 7 T
T
T
T
H E
H E
H E
H E D I A G R A M
D I A G R A M
D I A G R A M
D I A G R A M O F
O F
O F
O F C O N N E C T I N G
C O N N E C T I N G
C O N N E C T I N G
C O N N E C T I N G T H E
T H E
T H E
T H E
S F P
S F P
S F P
S F P
T O
T O
T O
T O T H E
T H E
T H E
T H E F I B E R
F I B E R
F I B E R
F I B E R
�
It is suggested not to insert the SFP module with the fiber into the slot directly.
Please first pull out the fiber and then install.
6.1.6
6.1.6
6.1.6
6.1.6
Change
Change
Change
Change Memory
Memory
Memory
Memory
There is the memory slot on the MPU card. When the memory card is damaged or
needs to expand the capacity, operate according to the following steps. The steps
for changing the memory are as follows:
Step 1:
Wear the anti-static gloves and anti-static wrists, making the anti-static wrists
well-contacted with the skin and well-grounded.
Step 2:
Pull out the desired board card according to the method described in the previous chapter.
Step 3:
Put the un-installed board card on the ESD mat.
Step 4:
Use the hands to remove the reed along the arrow direction, the memory automatically
pops up, and then take down it. The diagram of un-installing the memory is as follows:
F
F
F
F
I G U R E
I G U R E
I G U R E
I G U R E
6
6
6
6
1 8
1 8
1 8
1 8 T
T
T
T
H E
H E
H E
H E D I A G R A M
D I A G R A M
D I A G R A M
D I A G R A M O F
O F
O F
O F U N
U N
U N
U N
----
I N S T A L L I N G
I N S T A L L I N G
I N S T A L L I N G
I N S T A L L I N G T H E
T H E
T H E
T H E M E M O R Y
M E M O R Y
M E M O R Y
M E M O R Y
Step 5:
Use the hand to hold the two corners of the memory, locate according to the alignment gap
of the memory, insert the memory according to the arrow direction into the card socket. The
