MyPower S6600 Series Routing Switch Installation Manual
Installation Preparations
copyright
©
2015 Maipu All rights reserved.
3
Step 4:
Push another power module along the guide slot slowly and horizontally until the back of the
power module well contacts with the chassis backplane, as shown in the following figure:
F
F
F
F
I G U R E
I G U R E
I G U R E
I G U R E
6
6
6
6
3
3
3
3 T
T
T
T
H E
H E
H E
H E D I A G R A M
D I A G R A M
D I A G R A M
D I A G R A M O F
O F
O F
O F I N S E R T I N G
I N S E R T I N G
I N S E R T I N G
I N S E R T I N G T H E
T H E
T H E
T H E P O W E R
P O W E R
P O W E R
P O W E R M O D U L E
M O D U L E
M O D U L E
M O D U L E
Step 5:
Use the screwdriver to tighten the captive screws at the right and left of the power module.
6.1.2
6.1.2
6.1.2
6.1.2
Change
Change
Change
Change Card
Card
Card
Card
The MPU card, SFU card, and LPU card of the switch all support hot-swap. The
following takes changing the MPU card as an example. The changing process of
the other cards is similar and the manual does not describe any more.
Preparations
Preparations
Preparations
Preparations before
before
before
before Changing
Changing
Changing
Changing
Step 1:
Wear the anti-static wrist and confirm that the anti-static wrist is well-grounded.
Step 2:
If there is the air baffle at the location for installing the board, please uninstall the air baffle
first.
