WINDROWER OPERATION
169469/169470/169471
79
Revision E
6.3.8.2.1 From Field to Transport Mode
a. Set header on the ground (field position).
DANGER
Stop engine, and remove key from ignition
before leaving Operator’s seat for any reason.
A child or even a pet could engage an idling
machine.
b. Disconnect hydraulic and electrical connections:
1. Left side – Store hydraulic hoses and
electrical cable into the storage position. See
header operator’s manual.
2. Right side – Release the multi link, and place
into storage on windrower. See header
operator’s manual.
c. Retrieve temporary lift pin from storage location on
weight box, and install into
rear hole
(A) at the top
of the lift arms for additional lift height for transport
wheel deployment.
DANGER
To avoid bodily injury from fall of raised
header, always engage header lift cylinder
stops when working on or around raised
header.
d. Raise header to full height, stop engine, and
engage safety locks on lift cylinders.
e. Deploy header slow speed transport system. See
header operator’s manual.
f. Remove float pin from engaged position (B), and
insert in storage location (C). Secure with lynch
pin.
g. Remove pins (D) from lower end of lift linkages.
NOTE
Pins (D) are also used to secure weight box
to windrower linkage.
h. Release the safety lock on the header lift
cylinders.
i. Start engine, and lower header down onto the
transport wheels.
j. Pull up on center-link latch (E), and locate latch
into notch (F) on top of hook.
D
B
C
A
D65 SINGLE REEL HEADER SHOWN
E
F
Содержание M205 2012
