WINDROWER OPERATION
169469/169470/169471
71
Revision E
6.3.6.2.1 Reverse In Cab-forward Mode
WARNING
Back up slowly. Steering is opposite to normal
when reversing. Hold steering wheel at the
bottom and turn wheel in direction you want
the rear (cab-forward) of the machine to travel.
a. Move speed-range switch (D) to
L
.
b. Move throttle lever (F) to a mid-range position.
NOTE
Reversing in low speed-range and at
reduced engine speed is recommended
since steering will be less sensitive than at
higher speed settings.
CAUTION
Check again to be sure all bystanders have
cleared the area.
c. Move the Ground Speed Lever (GSL) (A)
rearward to desired speed.
d. Steer
as
shown.
6.3.6.3 Engine-forward
Operation
a. Swivel Operator’s station to engine-forward
position as follows:
1. Place Ground Speed Lever (GSL) (A) in
N-DETENT, and lock steering wheel. Engine
can be running.
IMPORTANT
If GSL is not in N-DETENT, damage to the
GSL cable may result when swivelling
Operator’s station.
2. Pull up on knob (B), and hold to release latch
(C) at base of steering column.
3. Turn steering wheel clockwise to pivot
Operator’s station counterclockwise 180° until
pin engages latch to secure Operator’s station
in new position.
b. Start engine (if not running). Refer to Section
6.3.5.1 Starting.
(continued next page)
ENGINE-FORWARD – SEAT FACES ENGINE
DIRECTION OF TRAVEL
C
A
B
CAB FORWARD MODE
D
F
A
Содержание M205 2012
