MAINTENANCE AND SERVICING
169469/169470/169471
125
Revision E
7.3 MAINTENANCE
SPECIFICATIONS
7.3.1 RECOMMENDED FUEL, FLUIDS AND
LUBRICANTS
7.3.1.1 Fuel
Use good quality diesel fuel from a reputable
supplier. For most year-round service,
No. 2 diesel fuel meeting ASTM specification
D-975 Grade S15 will provide good performance.
If the vehicle is exposed to extreme cold (below
20
˚
F (-7
˚
C), or is required to operate at
colder-than-normal conditions for prolonged
periods, use climatized No. 2 diesel fuel, or dilute
the No. 2 diesel fuel with 50% No. 1 diesel fuel.
This will provide better protection from fuel gelling
or wax-plugging of the fuel filters.
In extreme situations, when available fuels are of
poor quality or problems exist which are peculiar
to certain operations, additives can be used.
However, the engine manufacturer recommends
consultation with the fuel supplier or engine
manufacturer prior to use of fuel additives. Among
the situations where additives can prove useful
are the following:
A cetane improver additive can be used with
low cetane fuels.
A wax crystal modifier can help with fuels with
high cold filter plugging points (CFPP).
An anti-icer can help prevent ice formation in
wet fuel during cold weather.
An anti-oxidant or storage stability additive
can help with fuel system deposits and poor
storage stability.
A lubricity enhancer can be used to increase
the lubricity of fuels so that they meet the
requirements given in the table on the
previous page.
Diesel fuel conditioner is available from your
Dealer.
7.3.1.2 Fluids
Fluid Spec
Description Use
Anti-Freeze
ASTM
D-4985
Ethylene Glycol
With SCA
Equal Parts
With Water*
Engine Coolant
A/C
Refrigerant
R134A Refrigerant
Cab A/C
System
A/C
Compressor
Oil
SP-15 Compressor
Oil
Cab A/C
Compressor
Lubricant
* High quality, soft, de-ionized or distilled water as
recommended by supplier.
7.3.1.3 Lubricants
Lubricant Spec/Description
Use
Grease
SAE Multi-Purpose.
High Temp. Extreme
Pressure (EP2) Performance
With 1% Max Molybdenum
Disulphide (NLGI Grade 2)
Lithium Base.
As Required
Unless
Otherwise
Specified.
Engine Oil
SAE 15W-40 Compliant With
SAE Specs For API Class SJ
and CH-4 Engine Oil.
Engine
Crankcase
Hydraulic Oil
SAE 15W-0 Compliant With
SAE Specs For API Class SJ
and CH-4 Engine Oil.
Windrower
Drive.
Header Drive.
Gear
Lubricant
SAE 85W-140
API Service Class GL-5.
Extreme Pressure Gear
Lubricant.
Drive Wheel
Gears Before
Initial
Change.
SAE 75W-90
API Service Class GL-5.
Fully Synthetic Gear
Lubricant
(SAE J2360 Preferred).
Gearbox.
Drive Wheel
Gears After
Initial
Change.
7.3.1.4 Capacities
Item Capacity
Fuel Tank
97 U.S. Gallons (378 liters)
Hydraulic Reservoir
17.2 U.S. Gallons (66 liters)
Gear Box
2.2 U.S. Quarts (2.1 liters)
Drive Wheel
1.5 U.S. Quarts (1.4 liters)
Engine Cooling System
5.3 U.S. Gallons (20 liters)
Engine Oil Pan
15.0 U.S. Quarts (14.2 liters)
Air Cond. Refrigerant
3.6 lb. (1.63 kg)
Air Cond. Compressor Oil
8.1 fl. oz. (240 cc)
7.3.1.5 Storage
Your machine can operate at top efficiency only if
clean fuel and lubricants are used.
Use clean containers to handle all fuels and
lubricants.
Store in an area protected from dust,
moisture, and other contaminants.
Buy good quality, clean fuel from a reputable
Dealer.
Avoid storing fuel over long periods of time. If
you have a slow turnover of fuel in windrower
tank or supply tank, add fuel conditioner to
avoid condensation problems.
Store fuel in a convenient place away from
buildings.
Содержание M205 2012
