MAINTENANCE AND SERVICING
169469/169470/169471
162
Revision E
c. Loosen compressor mounting hardware (B), and
push compressor towards engine to release
belt (A) tension.
d. Remove belt (A).
e. Insert the drive end of a 1/2 inch drive ratchet
wrench into the belt tensioner (C).
f. Rotate tensioner counterclockwise until fan belt
(D) can be slipped off pulley (E). Release
tensioner, and remove wrench.
g. Remove belt in order 1-2-3 as shown. Route fan
belt around fan, and remove belt.
h. Install new belt (D) around fan, and onto pulleys in
order 3-2-1.
i. Insert the drive end of a 1/2 inch drive ratchet
wrench into the belt tensioner (C).
j. Rotate tensioner counterclockwise until belt (D)
can be slipped onto pulley (E). Release tensioner,
and remove wrench.
k. Check that belt is properly seated in all pulley
grooves.
l. Install A/C compressor belt (A) on pulleys.
m. Pry compressor away from engine so that a force
of 8–12 lbf (35–55 N) deflects the belt (A)
3/16 inch (5 mm) at mid-span.
n. Tighten compressor mounting hardware (B).
o. Re-check tension, and re-adjust as required.
p. Move maintenance platforms to working position,
and close engine compartment hood.
1
2
3
E
C
D
A
B
A
Содержание M205 2012
