manualshive.com logo in svg

MacDon M205 2012, Руководство оператора, Страница: 217 / 230

Поделиться
Скачать
MacDon M205 2012 Скачать руководство пользователя страница 217

OPTIONS AND ATTACHMENTS 

 

169469/169470/169471

 

215

 

Revision E

 

9.17  SWATH ROLLER LIFT/CONTROL 

If a swath roller is desired for canola or other 
similar crops, an axle mounted design is 
recommended. Windrower can be fitted with 
hydraulic lift version of swath rollers featuring in 
console controls. 

NOTE 

Swath Rollers are available directly from 
one of our Suppliers.  

9.18 TOWING HARNESS 

The towing harness is used together with the 
weight box if towing a D Series draper header 
behind the windrower is desired. 

9.19 WARNING BEACONS 

Roof mounted rotating warning beacons. 

 

Available for installation into pre-wired cab 
(including switch). The beacons are standard 
equipment for export windrowers, and optional for 
North America. 

9.20 WEIGHT BOX 

The weight box allows engine-forward transport in 
high range when the header is not attached. 

9.21 WINDSHIELD SHADES 

Retractable sun shades for front and rear 
windows. Attachment hardware is included. 

Содержание M205 2012







































































































































































































































Отзывы:

Нет отзывов