MacDon M205 2012, Руководство оператора

Страница: 203 / 230

MAINTENANCE AND SERVICING
169469/169470/169471
201
Revision E
7.13 MAINTENANCE SCHEDULE
The maintenance schedule (see next page)
specifies the periodic maintenance procedures
and service intervals. Regular maintenance is the
best insurance against early wear and untimely
breakdowns. Following this schedule will increase
machine life. For detailed instructions, refer to
Section 7 MAINTENANCE AND SERVICING. Use
the fluids and lubricants specified in Section 7.3.1
Recommended Fuel, Fluids and Lubricants.
Service Intervals: The recommended service
intervals are in hours of operation. Where a
service interval is given in more than one time
frame, e.g. “100 hours or Annually”, service the
machine at whichever interval is reached first.
IMPORTANT
Recommended intervals are for average
conditions. Service the machine more often
if operated under adverse conditions
(severe dust, extra heavy loads, etc.).
CAUTION
Carefully follow safety messages given under
Section 7.1 PREPARATION FOR SERVICING,
and Section 7.2 RECOMMENDED SAFETY
PROCEDURES.
7.13.1 BREAK-IN INSPECTIONS
BREAK-IN INSPECTIONS
HRS ITEM CHECK
Every .25
Road or 1
in Field
Drive Wheel Nuts
Torque – 220 lb-ft (300 N·m)
Repeat Checks Until Torque Stabilizes.
5
A/C Belt Tension
Caster Wheel Nuts Torque – 120 lb-ft (163–172 N·m)
Caster Wheel Anti-Shimmy Dampener Bolts
Inboard Bolt Torque – 100 lb-ft (135 N·m)
Outboard Bolt Torque – 85 lb-ft (115 N·m)
Walking Beam Width Adjustment Bolts Torque – 330 lb-ft (448 N·m)
10
Walking Beam Width Adjustment Bolts Torque – 330 lb-ft (448 N·m)
Drive Wheel Nuts
Torque – 220 lb-ft (300 N·m)
Repeat Checks at 20 and 30 hours
Neutral Dealer Adjust
50
Hose Clamps – Air Intake/Radiator/Heater/
Hydraulic
Hand-tighten Unless Otherwise Noted
Walking Beam Width Adjustment Bolts Torque – 330 lb-ft (448 N·m)
Caster Wheel Anti-Shimmy Dampener Bolts
Inboard Bolt Torque – 100 lb-ft (135 N·m)
Outboard Bolt Torque – 85 lb-ft (115 N·m)
Drive Wheel Nuts
Torque 220 lb-ft (300 N·m)
Repeat Checks Until Torque Stabilizes
Drive Wheel Lubricant Change
Main Gearbox Oil Change
Charge System Hydraulic Oil Filter Change
Return Oil Filter (if applicable) Change