HEADER OPERATION – R SERIES
169469/169470/169471
123
Revision E
6.7.3 DISC
SPEED
The header is allocated a code that the Windrower
Control Module (WCM) reads when the header is
first attached to the windrower, and the disc speed
set-point automatically becomes the minimum disc
speed for the header. The Operator can then
program the desired speed from the following
table on the Cab Display Module (CDM) to be
stored in the WCM memory so that if the header is
detached and then re-attached to the windrower,
the disc will operate at the original set-point.
Crop
Condition
Disc rpm *
Alfalfa
Heavy 2,100–2,300
Light 1,800–2,000
Sudan,
Sorghum,
Haygrazer,
Timothy
Tall and
Stemmy
2,300–2,500
Short
Grass
Dense 2,500
Thin 2,000–2,200
* Suggested Overload Setting – 1,300 rpm.
NOTE
Higher engine rpm may be required to
engage the R85 headers. Do NOT exceed
1,800 rpm.
NOTE
Desired disc speed will only be maintained
above 1,500 rpm (engine). Disc speed is
not adjustable below this rpm.
Display and set the desired disc speed as follows:
CAUTION
Check to be sure all bystanders have cleared
the area.
XXX0 = rpm
ENGAGE HEADER
HEADER INDEX
SWITCH –
OFF
ON GSL PRESS
FAST
OR
SLOW
DISPLAY SHOWS
XXX0 DISC RPM
DONE
SPEED
O.K.?
NO
YES
DISPLAY
SELECTOR
DISPLAY
HEADER INDEX
FAST
SLOW
Содержание M205 2012
