MAINTENANCE AND SERVICING
169469/169470/169471
138
Revision E
7.7.5 PARK
BRAKE
The brake is applied when the interlock is fully
engaged. To engage the interlock and hence the
brake, the Ground Speed Lever (GSL) must be in
the N-DETENT position, and the steering wheel
centered.
7.7.5.1 Interlock
Switch
DANGER
Stop engine, and remove key from ignition
before leaving Operator’s seat for any reason.
A child or even a pet could engage an idling
machine.
The Ground Speed Lever (GSL) switch is located
inside the console but can easily be removed for
adjustment or replacement. Check that GSL
contacts the switch lever and pushes plunger.
Adjust or replace switch as follows:
a. Place GSL in N-DETENT, shut down engine, and
remove key.
b. Remove the five screws (A) securing control panel
(B) to console, remove panel, and store in the
tray.
c. From inside the console, pull switch support (C) so
that rubber nuts (D) pull out of mounting holes,
and remove switch support from console.
d. Adjust switch (E) as follows:
1. Loosen screws (F), and rotate switch on
support sufficiently so that GSL will contact
switch lever (G), and push in the plunger.
2. Tighten
screws
(F).
e. Replace switch as follows:
1. Disconnect wiring harness at connector (G).
2. Cut nylon ties (H).
3. Remove screws (F), and remove switch.
4. Install new switch on support with screws.
5. Secure harness to support (C) with nylon
ties (H).
6. Connect harness to console wiring (G).
(continued next page)
G
B
F
E
F
G
H
C
D
B
A
Содержание M205 2012
