MAINTENANCE AND SERVICING
169469/169470/169471
165
Revision E
7.9.2 ROTOR TO SCREEN CLEARANCE
a. Check clearance between trailing edge of rotor (A)
and screen. It should be .04–.32 inches (1–8 mm)
at all locations when rotating.
NOTE
Rotor may touch screen as long as it
continues to rotate.
b. If necessary, adjust clearance as follows:
1. Loosen nut (B) on motor support (C).
2. Move support in or out until duct is
0.08
−
0.24 in. (2–6 mm) from screen near the
center.
3. Re-tighten nut (B).
4. Loosen the two motor mount bolts (D).
5. Move motor/duct assembly (E) to obtain
0.04
−
0.32 in. (1–8 mm) gap to screen at full
rotation of the duct.
6. Re-tighten nuts (D) on motor mount.
c. Close screen access door (F), and engage latch
(G).
d. Lower engine compartment hood.
A
D
E
0.04-0.32 in.
(1-8 mm)
0.08–0.24 in.
(2–6 mm)
B
C
G
F
Содержание M205 2012
