WINDROWER OPERATION
169469/169470/169471
81
Revision E
8. Make the electrical connection at the joint (Q),
and at the header wheel (P).
IMPORTANT
To prevent damage to the lift system when
lowering header lift linkages without a
header or weight box attached to
windrower, ensure that float engagement
pin is installed in storage location (C), and
NOT
installed at hole location (B).
o. Drive windrower so that windrower lift arms are
positioned into the weight box pockets.
p. Raise lift arms slightly, and install locking pins (D)
into pockets and through windrower header lift
linkages. Secure with hairpin.
NOTE
Pins (D) were previously removed from the
header lift linkage lower end.
q. Route the weight box harness (R) to the electrical
connector at the left side lift linkage, and connect
harness to connector.
(continued next page)
P
B
C
D
R
Содержание M205 2012
