MAINTENANCE AND SERVICING
169469/169470/169471
174
Revision E
7.10.2 HEADLIGHTS: ENGINE-FORWARD
DANGER
Stop engine, and remove key from ignition
before leaving Operator’s seat for any reason.
A child or even a pet could engage an idling
machine.
NOTE
Header should be attached and raised to
maintain proper windrower stance.
7.10.2.1 Alignment
a. Position windrower on level ground in front of a
vertical surface in accordance with the illustration.
b. Shut down engine, and remove the key.
c. Turn headlights (A) ON, and switch to
low-beam.
d. Align the headlights to the following specifications
by turning adjusting screws (B).
Adjustments are for low-beam.
Light beams laterally centered on the direction
of travel line from the headlights (i.e. not
skewed left or right).
Upper limit of the beam not higher than
49-3/4 inches (1,263 mm) above ground at a
distance of 25 ft. (7.5 m) from the headlight.
7.10.2.2 Bulb
Replacement
a. Remove the two screws (C), and remove
headlight assembly from hood.
b. Pull wiring harness connector off the headlight
assembly, and remove rubber insulator boot (D).
(continued next page)
49.75 in.
(1263 mm)
maximum
C
D
B
A
Содержание M205 2012
