MAINTENANCE AND SERVICING
169469/169470/169471
197
Revision E
7.12.2 CASTER WHEELS
7.12.2.1 Tire
Inflation
a. Visually check
daily
that tires have not lost
pressure. Under-inflation of drive tires can cause
side wall cracks.
DANGER
To avoid severe personal injury or death
caused by machine runaway, shut off engine
and remove key before performing any of the
following checks and/or adjustments.
b. Measure tire pressure annually with a gauge.
Maintain the pressure at 10 psi (69 kPa).
NOTE
If caster wheels shimmy, a possible cause
is over-inflation.
DANGER
Never install a tube in a cracked wheel rim.
Never weld a wheel rim.
Make sure all the air is removed from a tire
before removing the tire from the rim.
Never use force on an inflated or partially
inflated tire. Make sure the tire is correctly
seated before inflating to operating pressure.
Do not remove, install or make repairs to a tire
on a rim unless you have the proper
equipment and experience to perform the job.
Take the tire and rim to a qualified tire repair
shop.
If the tire is not in correct position on the rim,
or if too full of air, the tire bead can loosen on
one side, causing air to leak at high speed and
with great force. An air leak of this nature can
thrust the tire in any direction, endangering
anyone in the area.
Use a safety cage if available.
Do not stand over tire. Use a clip-on chuck and
extension hose.
Содержание M205 2012
