© 2016 MA Lighting T e chno lo gy Gm bH | Da chde ck e rstr. 16 | D-97297 W a ldbütte lbrunn | Ge rm a ny
P ho ne +49 5251 688865-27 | suppo rt (a t) m a -do t2.co m | www.m a lighting.co m
1 of 1
8.46. Pause Command
This page describes the syntax and how to use the pause command.
To go to the pause command, press the small
Pause
key on the console.
Description
With the pause command, you can
pause a crossfade between two cues
pause a effect stored in a cue
stop a current pause of an executor
The pause command is a toggle function.
If the executor is running, the pause command will set it to a pause.
If the executor is set to a pause, the pause command will stop the pause and keep him running again.
Syntax
To pause and stop a pause of an executor.
Pause Executor 1
Example 1
Let´s assume you will pause the chaser on executor 1.
Press the small
Pause
and then the respective executor button
on the console.
The executor 1 is set to pause.
Example 2
Let´s assume you will stop the pause on executor 1 and keep the chaser running again.
Press the small
Pause
and then the respective executor button
on the console.
The executor is running again.
Related Links
8.47. Preset Command
438
Содержание dot2 XL-F
Страница 1: ...Version 1 2 2016 05 25 English...