MA lighting dot2 XL-F, Руководство пользователя

Страница: 119 / 509

© 2016 MA Lighting T e chno lo gy Gm bH | Da chde ck e rstr. 16 | D-97297 W a ldbütte lbrunn | Ge rm a ny
P ho ne +49 5251 688865-27 | suppo rt (a t) m a -do t2.co m | www.m a lighting.co m
1 of 1
Create cues
Cues are organized in a cue list on an executor. You can store cues on any executor that isn't a group master or a
special master.
You need some fixtures and some values in your programmer. If you don't know what I'm talking about please have
a look at the
What is the Programmer and How to add and patch fixtures help pages.
With some active values in your programmer you can choose to store this information in a cue. This can be on the
main executor or on one of the other executors. If you don't know what executors are please read the
What are
executors help page.
If you want to store your values in a cue on the main executor press Store Please . This will store the first
available cue number. If you don't have anything on the main executor before doing this then you'll now have cue
number 1. If you have cue number 1, then you'll not store the values directly. Instead you'll be asked what you want
to do. This is generally the case the second time you store a cue on an executor. You'll get this Choose Store
Method window:
Figure 1: Choose store method.
There are four options here:
Merge
- This option will add the values to the existing values in the cue.
Remove
- This will remove the existing values of the same type that you currently have active in your programmer.
Overwrite - This will delete the current content of the cue and add your active value to the cue.
Create Second Cue
- This option is only available when you have a cue list with only one cue. Pressing this will
add your currently active values to a new cue number 2.
If you want to store a specific cue number then you can use a more precise command input. E.g. you want to store
cue number 5. Then you can use the follow key presses:
Store Cue 5 Please . You can even add a cue timing
while storing it. E.g. you want to store cue number 5 with a fade time of 3 seconds. To do this press the following
keys:
Store Cue 5 Time (= Fade command) 3 Please .
If you don't specify the cue timing when you store the cue, then it uses the default times set in the Time Defaults
119