Lenovo HX3510-G, Инструкция по установке и обслуживанию

Страница: 46 / 1240

• Ethernet firmware is stored in ROM on the Ethernet controller and on the system board.
• HBA firmware is stored in ROM on the HBA adapter.
Configuring the server
This section describes the general configuration of the server. The next section describes the specific
procedures for the Lenovo Converged HX Series appliances. The following configuration programs come
with the server:
• Setup Utility
The Setup Utility is part of the UEFI firmware. Use it to perform configuration tasks such as changing
interrupt request (IRQ) settings, changing the startup-device sequence, setting the date and time, and
setting passwords. For information about using this program, see “Using the Setup Utility” on page 35.
• Boot Manager program
The Boot Manager is part of the UEFI firmware. Use it to override the startup sequence that is set in the
Setup Utility and temporarily assign a device to be first in the startup sequence. For more information
about using this program, see “Using the Boot Manager” on page 39.
• FastSetup
FastSetup is a no-cost software tool that helps simplify the maintenance and deployment
of selected BladeCenter chassis, servers, and components. The intuitive graphical interface
initializes all phases of server setup, including discovery, update, and configuration. Features
include templates that enable replication of settings to many servers and automation that
reduces hands-on time and user errors. Wizards and other default settings enable customization
capabilities. The low-touch, set-once and walk-away feature reduces the hands-on server setup
time from days to minutes, particularly for larger deployments. For information about this tool, see
http://www.ibm.com/support/entry/portal/docdisplay?brand=5000008&Indocid=TOOL-FASTSET.
• Integrated management module II (IMM2)
Use the IMM2 for configuration, to update the firmware and sensor data record/field replaceable unit
(SDR/FRU) data, and to remotely manage a network. For information about using the IMM2, see “Using
the integrated management module” on page 40 and the
Integrated Management Module II User's Guide
at http://publib.boulder.ibm.com/infocenter/ systemx/documentation/topic/ com.lenovo.sysx.imm2.doc/
printable_doc.html.
• Remote presence capability and blue-screen capture
The remote presence and blue-screen capture features are integrated functions of the IMM2. The remote
presence feature provides the following functions:
– Remotely viewing video with graphics resolutions up to 1600 x 1200 at 75 Hz, regardless of the system
state
– Remotely accessing the server, using the keyboard and mouse from a remote client
– Uploading a diskette image to the IMM memory and mapping it to the server as a virtual drive
The blue-screen capture feature captures the video display contents before the IMM restarts the
server when the IMM detects an operating-system hang condition. A system administrator can use
the blue-screen capture feature to assist in determining the cause of the hang condition. For more
information, see “Using the remote presence and blue-screen capture features” on page 41.
• Ethernet controller configuration
For information about configuring the Ethernet controller, see “Configuring the Ethernet controller” on
page 43.
• Lenovo ToolsCenter Suite CLI
34
HX3510-G, HX5510, HX5510-C, HX7510 Installation and Service Guide