Komatsu A31001, Руководство по эксплуатации и техническому обслуживанию

Страница: 298 / 376

5.
Swing the upper structure by 180 ° to set its posture to be
the same as one displayed on the machine monitor, and
set the upper structure parallel to track.
6.
Move the machine to set it to the correct posture, wait 10
seconds, and then press the switch “F3”.
F3: Proceeds to the next step.
F5: The screen returns to the screen of step 2.
7.
Hold down the switch “F1” according to the display on ma-
chine monitor.
F1: Proceeds to the next step.
F5: The screen returns to the screen of step 6.
“Adjustment Diagnosis” in a rearward direction is execut-
ed, wait for a little while until it is completed.
F2: Cancels the diagnosis and returns the screen to the
screen of step 6.
8.
When the “Adjustment Diagnosis” in a forward direction is
completed, the screen changes to the screen shown in the
figure on the right. Press the switch “F3”.
F2: The screen returns to the screen of step 6.
F3: Displays the diagnosis result.
• If the adjustment is judged to be unnecessary as a re-
sult of “Adjustment Diagnosis”,
execute the daily calibration of bucket edge continu-
ously.
Press the switch “F6”, and the screen returns to “IMU
Adjustment” screen.
MACHINE MONITOR SETTING
7-182