Komatsu A31001, Руководство по эксплуатации и техническому обслуживанию

Страница: 238 / 376

2.
Tap “Registration” button.
3.
The message of “Please have your one-time SiteLink3D
registration code ready.” is displayed, and tap ENTER but-
ton.
4.
Input the one-time registration code issued with WebPortal
of Sitelink3D, and tap “OK” button.
When the registration of code is succeeded, the message
indicating the success of registration is displayed.
If the registration of code is failed, the error message is
displayed. Check the one-time registration code and input
the correct code.
5.
When the registration is completed, turn the starting switch
key to OFF position, turn it to ON position again, and re-
start the control box in order to make the setting enabled.
METHOD FOR CONNECTING TO Sitelink3D
To connect to Sitelink3D, the registration of the control box to Sitelink3D must have been completed.
In addition, write the address and site number of server with WebPortal of Sitelink3D in advance. (Example:
192.168.0.1/21211)
$-'
$-'
$-'
CONTROL BOX SETTING
7-122