Komatsu A31001, Руководство по эксплуатации и техническому обслуживанию

Страница: 149 / 376

1.
Lower the bucket edge to the ground at an arbitrary place,
tap “Measure Point” button or tap “Select” button to select
any point, and display the Point Coordinates.
2.
Tap the item of “Grade” of “Main-fall (A->B)”, and input the
numeric value.
REMARK
• Set “Direction”, “Grade” of “Cross-fall”, and “Grid inter-
val” as needed.
• “A” button and “B” button are not used.
3.
Tap “Exit” button, and the screen changes to “Message-
Box” screen.
4.
To reflect the created Surface to currently setting Surface,
tap ENTER button.
REMARK
On this screen, even if you tap ENTER button, the setting
will not be completed.
SETTING CONTROL BOX
7-33