KLIC-N-KUT KNK Force, Руководство пользователя

Страница: 303 / 401

303

Area Width and Area Height : Enter the dimensions of the material from which you will be cutting so
that the nesting will arrange the shapes within that available area, if possible.

Spacing : Enter the minimum distance allowed between shapes.

Max Rotations : Shapes will be rotated in an effort to pack them together more closely. The maximum
rotations allowed can be set between 0 and 100. However, the more rotations you select, the longer the
rendering time for the nesting function. Note: When cutting from a material, such as patterned paper,
where the shapes need to be oriented as designed on the
Cutting Mat , set Max Rotations to 0 so that
none of the shapes will be rotated during the nesting process.

Fit Threshold : A setting between 1 and 100, with a higher value attempting to pack the shapes closer
together than a lower value. As with Max Rotations , the higher the number, the longer the rendering
time for the nesting function.

Ungroup : If any of the shapes are grouped together, but you do not want them treated as a group when
nesting, mark this option.
•
Clicking on Update Preview will perform the nesting process and the resulting arrangement will appear in
the Preview :
•
IMPORTANT: Choosing very high values for Max Rotations and Fit Threshold , when there are many
shapes on the page, can lead to freezing of the software. Testing has shown that the amount of space
saved may not amount to much compared to more conservative settings:
•
IMPORTANT: Be sure to check the arrangement before cutting to make sure there is no overlap. For
example, if the available cardstock had only been 10” x 10”, then overlap between the shapes would have
occurred:
Preview
Click here to manually
update the preview
Click OK when done
Max Rotations = 4
Fit Threshold = 10
Area = 113 in
2
Max Rotations = 12
Fit Threshold = 30
Area = 111 in
2
Max Rotations = 36
Fit Threshold = 90
Area = 111 in
2