KLIC-N-KUT KNK Force, Руководство пользователя

Страница: 164 / 401

164

Smooth: In some cases, it might be necessary to decrease Smooth to get a tighter fit for a print and cut
application. Alternatively, you can also create an Inset after the trace, when needed. Refer to the Inset
Offset option in Section 8.05.
7.03.7 Monochrome Trace for a Print and Cut Application: Effect of Resample
•
In many print and cut applications, a raster image is imported with the intention of printing that image and
then cutting precisely along the edges
of that image. For this reason, it’s very important to get as accurate of
a trace as possible.
•
The Resample setting multiplies the number of pixels in the image allowing a more precise scan of the
border between the image and the background color. The following image is imported and traced with the
default of
x 1.0 left as the Resample setting:
•
Before clicking on OK , note two settings that have also been marked:

Blackout: apply if there are internal cut lines that are not needed. In this example, only the outside of
the penguin needs to be traced. Thus, applying Blackout will remove the internal cut lines showing in
the Preview :

Add Image Layer (Print + Cut): Mark this box so that the original image is also imported onto the
Cutting Mat . Note that if you check the Style Panel settings on each layer, one will be assigned as
Select
Monochrome
Resample is
left at x 1.0
Preview
Preview of trace with Blackout not
checked. Note the internal red
lines that would be cut.
Preview of trace after Blackout is
checked. The internal red cut lines
are removed.