KLIC-N-KUT KNK Force, Руководство пользователя

Страница: 199 / 401

199
•
No shapes need to be preselected. Just hold down left mouse button at any location and then drag the
mouse to a new location. The
Tool Options provide the following information:
•
To better illustrate these variables, the following shape will be used and the various measurements will be
determined using the
Ruler :

X/Y: This is the starting position on the screen and will match the X/Y grid location on the Cutting Mat .
You can extend beyond the boundaries of the mat, if needed.

W x H: Indicates how far the mouse has been dragged away from the starting point. Note that as the
mouse is dragged, a blue dotted line will appear. In this example, when measuring for the distance “
a
”,
the H
should be zero since it’s a vertical measurement only. In fact, making sure
H is 0 is one way to
make sure the W is the correct measurement needed:




Distance: This is the actual measurement between the starting location and the ending location. In the
prior measurement, W is the same as Distance because the measurement was a horizontal one. But
measuring the length o
f “
b
” is not:

a
b
c
The mouse is dragged
from here…
The measurement for a
is 1.18”
a
… to here
Distance moved in the X
direction and in the Y direction Distance from starting location
to the current location
Starting location
on the screen
Angle formed by the
W & H move
b
The measurement for b is
2.10”
W
H
…to here
The mouse is dragged
from here…