Art. No. SC 1000 KNX
Figure 21: Example of a function view (right) - 4 KNX channels are allocated
If you touch the sensor surface of a channel with your finger, the device branches to the
submenu of the channel control. All channels within the function view are activated - just like in
the room view - by selection operation. Functions must first be selected. Afterwards, operations
are performed by means of the control command.
The functions of a function unit are operated in a similar way as in the room view. For this
reason a detailed description will not be necessary here and we ask you to refer to the chapter
on the room view (see page 72).
i
A KNX channel is allocated to a function unit in the parameter node of the corresponding
channel. The channels can normally be allocated to one of the maximum 8 function units.
Hence, it is also possible to allocate a channel to a function unit which is not visible on the
function page, because it was not created in the configuration of the function units in the
parameter node "Display -> Function units". In this case, the KNX channel concerned
cannot be accessed via the function page!
It is generally recommendable to assign KNX channels only to function units that are also
available in the function unit configuration.
Page 75 of 347
Software "Smart Control 501511"
Functional description
