Art. No. SC 1000 KNX
station display page has been
configured.
Function 2 on the
favourite page
Like parameter "Function 1
on the favourite page".
Like parameter "Function 1 on the
favourite page". Only with "Raster
favourite page" = "2-gang".
Function 3 on the
favourite page
Like parameter "Function 1
on the favourite page".
Like parameter "Function 1 on the
favourite page". Only with "Raster
favourite page" = "4-gang".
Function 4 on the
favourite page
Like parameter "Function 1
on the favourite page".
Like parameter "Function 1 on the
favourite page". Only with "Raster
favourite page" = "4-gang".
h
Display -> Rooms
Number of rooms
1
...8
Each KNX channel must be allocated to
a room (area of operation). Channels
can be operated and visualized room-
oriented via the room page. All rooms
(1...8) that were created in the ETS
PlugIn at this point are available on the
room page.
Name of room 1
Room 1
, text entry up to a
max. of 18 characters
A display name can be assigned here to
the room concerned (e.g. "Living room",
"Kitchen"). The name, among other
things, is displayed in plain text in the
room buttons on the room page. The
possible length of the text depends on
the set size of the letters or numbers
entered in the entry field and can vary. A
text with a maximum of 18 characters
can be entered.
Name of room 2...8
Room x
, text entry up to a
max. of 18 characters
Like parameter "Name of room 1".
Installation location
Room 1: Name of room 1
...
Room 8: Name of room 8
This parameter specifies the room in
which the device is installed. In this way,
the device sorts the set room in the
room view to the topmost position so
that the locally installed functions are
quickly and easily available for
operation.
h
Display -> Function units
Number of function
units
1...
4
...8
Each controllable KNX channel is
allocated to a function unit (light,
shading, heating, ...). Up to 8 function
Page 250 of 347
Software "Smart Control 501511"
Parameters
