Art. No. SC 1000 KNX
be configured centrally as "available" by the corresponding parameter in the ETS in the
"Display" parameter node.
Up to 14 different measured values can be displayed on the display page of the weather station.
The measured values of various data types have to be made available to the device via the bus
from an external weather station. Separate communication objects are available for this. In the
ETS in the parameter node "Display -> Weather station" you must define which of the maximum
of 14 measured values are displayed on the display page (see page 125-126).
If no measured values have been received yet, for example immediately after a device reset,
the display shows an invalid value represented by "---".
Each measured value on the display page of the weather station has its own display element
(figure 57). The display elements normally contain a measured value symbol (A), a name of the
measured value (B) in textual form and the measured value itself (C). The measured value
symbols are permanently assigned to the measured values. Only the 4 optionally available
external values have no measured value symbols. The text names are entered in the ETS in
which each of the measured values is identified individually and can be adapted to the local
conditions.
Figure 57: Example of a weather station display page
(A) Measured value symbols (permanently assigned to the measured values / The optionally
available external values 1...4 have no symbol.)
(B) Name (is configured in the ETS)
(C) Measured value
Up to 4 different measured values can be displayed at the same time on the display page of the
weather station. You can switch the display so that all configured measured values can be
viewed gradually either by the sensor surfaces
X
/
Y
or alternatively by a vertical movement of
your finger.
Page 124 of 347
Software "Smart Control 501511"
Functional description
