manualshive.com logo in svg

Jung Smart Control SC 1000 KNX, Продуктовая документация

Поделиться
Скачать
Jung Smart Control SC 1000 KNX Скачать руководство пользователя страница 238

Art. No.  SC 1000 KNX 

Figure 113: Example of keyboard editing mode for setting a switching time

i 

The switching times settable directly on the device may only be edited in 24 hour format, 
irrespective of the configured display format of the time. 

i 

The switching times changed on the device are saved in the non-volatile memory of the 
device. Switching times changed on the device incl. allocations of channels, channel 
commands and allocations for random and astro functions can be overwritten during a 
programming operation with the default switching times of the ETS. For this purpose, the 
parameter "Overwrite timer parameter" in the parameter node "Display" must be set to 
"Yes". If this parameter is configured to "No", then the last switching times set on the 
device remain unchanged during a n ETS programming operation.

Deleting switching times and inserting new 

On the bottom edge in the display area (G) of a switching time submenu, the "Delete" button is 
visible (figure 111). The delete mode of a switching time is selected by touching this button 
(Display: 

>

). The switching time is first deleted, however, when the "Save 

>

" icon in the status 

line of the submenu at the top edge of the display is pressed. The configurations for the 
switching time concerned are discarded and the allocation of channels are removed by the 
deletion.
Deleted switching time are inactive and are removed from the switching time overview 
(figure 110). As a result, it is possible that the overview will display a lower number of switching 
times than the maximum 8 available. 
When a switching time is deleted, a memory location is reserved that can be assigned again 
later at any time by the creation of a new switching time. Deleted switching times can therefore 
be set up again directly on the device. For this purpose, a button with the name "New - create 
switching time" is displayed in the overview (figure 114). If all 8 switching times are available, 
the "New" button is omitted. 

Page 238 of 347 

Software "Smart Control 501511" 

Functional description 

Содержание Smart Control SC 1000 KNX




























































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды