JDS Uniphase CellAdvisor JD780A Series, Руководство пользователя

Страница: 50 / 592

JD780A Series Analyzers
50
Getting Started
updated with information about the connected network including SSID, status, authentication
type, encryption method, BSSID, and assigned IP address(es). If you have selected
Auto for
IPv6 in step 6 , you will have Link-Local, Stateless, and Stateful instead of IP Address. If you see
the green Wi-Fi indication with a red exclamation mark in the center, it means that an IP address
has not been assigned.
NOTE
It is important to record the IP address(es) if you want to use the Web Remote on your
computer.
8.
To disconnect the currently connected network, select the network and then press the
Disconnect soft key.
9.
To forget the selected network and delete it permanently from the list, press the Remove soft key.
Figure 4 Example of Wi-Fi connection information window
Enabling Web-based remote control
If your JD780A series has the Wi-Fi Connectivity option installed with a license, you can enable this
Web Remote feature to control your instrument from most of Web browsers including Windows
Internet Explorer (IE) 6 and later, Firefox, Chrome, Safari, and Android native browser in an accessible
network. You can also use this feature to allow other users to access your instrument remotely and
share the live screen concurrently with up to 10 clients in the network.
Procedure
1.
Press the SYSTEM hot key.
2.
To get the IP address assigned to your instrument, do one of the following:
–
For wireline LAN connection:
a. Select System Configuration > Ethernet Config > IPv4 or IPv6 .
b. Toggle the Mode soft key and select DHCP or Auto for automatic IP addressing.
c. Press the Apply soft key.
The Ethernet Configuration box is updated with assigned IP address(es).
d. Record the IP address(es). For IPv6 Auto, you will see Link-Local, Stateless, and
Stateful instead of IP Address.