JDS Uniphase CellAdvisor JD780A Series, Руководство пользователя

Страница: 18 / 592

JD780A Series Analyzers
18
About This Manual
Purpose and scope
The purpose of this manual is to help you successfully operate the JD780A series (firmware version
3.061 and later) and use its features and capabilities. This manual includes instructions that describe
how to operate, set up, configure, and use the JD780A series, consisting of JD785A Base Station
Analyzer, JD786A RF Analyzer, and JD788A Signal Analyzer.
Assumptions
This manual is intended for novice, intermediate, and experienced users who want to use the JD780A
series effectively and efficiently. We are assuming that you have basic operation experience and are
familiar with basic mobile communication concepts and terminology.
Safety and compliance information
Safety and compliance information for the instrument are provided upon your request.
Safety consideration
It is mandatory to permanently connect this product to the protective earth.
When powering this instrument externally, always use an AC power cable that includes an earth
(safety) ground connection, which is shipped with your instrument.
WARNING
Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage and other hazards. Refer all servicing to qualified JDSU
service personnel.
CAUTION
This equipment contains parts and assemblies sensitive to electrostatic discharge (ESD).
Use ESD precautionary procedures when touching, removing, or inserting ESD sensitive
parts and assemblies, or damage to components could result.
An electrostatic-sensitive device can only withstand voltage spikes of 10 to 100 volts. Any
discharge greater than this can damage or effectively destroy such a device while going
unnoticed by a technician. Common plastics (synthetic insulating materials), clothing, and
paper or cardboard are the most common source of static charges.
CAUTION
This instrument uses a Lithium Ion battery that, if not connected correctly, may lead to
explosion. In case the battery needs to be exchanged, it must be the same kind as or
compatible with the one shipped with your instrument.
The battery must not be disposed of in a landfill site or as municipal waste, and should be
disposed of according to your national regulations.
Battery
The battery pack that comes with the instrument is Lithium Ion and it may lead to explosion if not
connected correctly. In case the battery needs to be replaced, it must be one of the same kinds or
compatible ones. Disposal of the batteries must be done according to local safety and environmental
regulations.