JDS Uniphase CellAdvisor JD780A Series, Руководство пользователя

Страница: 49 / 592

JD780A Series Analyzers
Getting Started
49
Bluetooth mode to enable communicate between your instrument and your computer with application
software such as JDRemote and JDViewer or to transfer files to a Bluetooth storage device. See
“Appendix G – Bluetooth connection” on page 578 for more information.
Enabling Wi-Fi connection
Wi-Fi Connectivity is an optional feature that you can activate by installing a purchased license on your
JD780A series. After plugging a USB Wi-Fi LAN card using Realtek NICs into the instrument, you can
join a wireless network from the instrument so that you can have access to StrataSync or control the
instrument from the Web-based remote control on a computer.
Procedure
1.
Plug in your USB Wi-Fi LAN card to the USB Host port of the JD780A series.
The Wi-Fi LAN card is detected and the white Wi-Fi indicator appears on the screen to indicate it.
NOTE
CellAdvisor JD780A series is compatible only with a USB LAN card that uses Realtek
NICs (RTL8188eu, RTL8192cu, and RTL8812au).
2.
Press the SYSTEM hot key.
3.
Select System Configuration > Remote Interface > Wi-Fi .
The Wi-Fi mode is turned on automatically. After searching nearby networks, the instrument
displays a list of networks.
4.
To select a network to join, complete the following steps:
a. To refresh the networks list, press the Scan soft key.
The instrument displays all detected networks as Detected and previously connected ones
as Saved .
b. Highlight a network to join by using the arrow keys or rotary knob.
c. Press the Select soft key.
The Wi-Fi Connection Info window appears for entries. Figure 4 is an example.
5.
To enter a user identity and a password for the network, complete the following steps:
d. Tap on the input box for Identity , if required.
The on-screen keyboard appears.
e. Type your identity, and then press the Apply soft key.
f. Tap on the input box for Password , if required.
The on-screen keyboard appears.
g. Type a correct password that must be at least eight characters long.
h. Press the Apply soft key.
i. To view the password exactly as entered, tap the checkbox for Show Password to enable
it.
6.
To configure IP network settings, complete the following steps:
a. Select the TCP/IP protocol option from the choices: IPv4 and IPv6 .
Sub-selection options change according to your selection. If the selected network supports
IPv6, you can configure IP settings for it.
b. Do one of the following:
–
To enable automatic IP addressing, select DHCP for IPv4 or Auto for IPv6.
It is recommended that you select DHCP unless otherwise you know static IP
addresses.
–
To manually assign fixed IP addresses, select Static , and then enter addresses as
required for IPv4 or IPv6. If you do not have required information, contact your
network administrator.
–
To disable the IPv6 protocol, select Off .
7.
Press the Connect soft key.
Once connected, the Wi-Fi indicator turns to green and the Wi-Fi Connection Info window is