JDS Uniphase CellAdvisor JD780A Series, Руководство пользователя

Страница: 27 / 592

JD780A Series Analyzers
Getting Started
27
Front panel
The JD780A series analyzers have the same front panel look as like Figure 1, except for the bumpers
in different colors.
Power on/off button
Key Description
POWER ON/OFF
– You can turn your instrument on or off. Two LEDs indicate power
source and status. See
“Starting up the JD780A series” on page 31.
Function hard keys
You can use these hard keys to activate specified functions as labeled on each key.
Key Description
MODE
– You can select an analyzer mode from all the standard and optional modes
available to your instrument.
FREQ/DIST
– You can configure frequency or distance settings.
AMP/SCALE
– You can configure amplitude and scale settings.
BW/AVG
– You can configure bandwidth and average settings.
TRACE/DISPLAY
– You can set up trace and display parameters.
MARKER
– You can analyze measurements with markers.
PEAK SEARCH
– You can set up peak search parameters.
Hot keys
When the user input field on the screen is inactive, you can use these hot keys to activate specific
functions instead of numbers. When you see the user input field activated or highlighted, press the
ESC hard key to use these hot keys.
Key Description
MEASURE
– You can select measurements available for your selected analyzer mode.
MEASURE SETUP
– You can set measurement parameters available for your selected
measurement mode.
SAVE/LOAD
– You can save or load your current screen, result, setup, or limit into or
from the internal memory or an external USB memory drive.
SWEEP
– You can configure sweep parameters.
TRIGGER
– You can select trigger options such as internal, external, and GPS.
SYSTEM
– You can configure your system settings or view your current system
information.