The User Manual of JAC200 Series General Frequency Converter
- 17 -
:
Voltage unit: V
:
Rotating speed unit: RMP
: Percentage %
Digital display area:
There are 5 digits in LED display, including set frequency, output frequency, various monitoring data, alarm
code, etc.
Keyboard button specification
Table 4-1 Keyboard function list
Key
Name
Function
Programming key
Enter or exit the primary menu
ENTER key
Gradually enter menu picture and confirm setup parameter
Increment key
Progressive increase of data or function code
Decrement key
Progressive decrease of data or function code
Shift key
The display parameter can be selected in cycle in stop display
interface and in running display interface; the modified bit of
parameter can be selected when the parameter is modified.
RUN key
The run key is used for running in keyboard operation
STOP/RESET
In running state, this key can be used to stop running; when
there is fault alarm, this key shall be used for resetting. The
features of this key are restrained by Function Code F7-02.
Multifunctional key
The function shall be switched according to F7-01 and it is
possible to define this multifunction key as command source or
direction
