INVT GD200L-004G-4, Руководство по эксплуатации

Страница: 60 / 187

Goodrive200L inverters Function parameters
55
Function
code
Name Detailed instruction of parameters
Default
value
Modify
operation:
Sln REV
Previous
direction
Current
direction
ON OFF→ON
Forward Reverse
Reverse Forward
ON ON→OFF
Reverse Forward
Forward Reverse
ON→
OFF
ON
Decelerate to stop
OFF
3:3-wire control 2; Sin is the enabling terminal on
this mode, and the running command is caused
by SB1 or SB3 and both of them control the
running direction.NC SB2 generates the stop
command.
COM
SB2
SB1
FWD
REV
SIn
SB3
Sln FWD REV Direction
ON
OFF→
ON
ON Forward
OFF Reverse
ON
ON
OFF→
ON
Forward
OFF Reverse
ON→
OFF
Decelerat
e to stop
Note : for the 2-wire running mode, when
FWD/REV terminal is valid, the inverter stop
because of the stopping command from other
sources, even the control terminal FWD/REV
keeps valid; the inverter won ’ t work when the
stopping command is canceled. Only when
FWD/REV is relaunched, the inverter can start
again. For example, the valid STOP/RST stop
when PLC signal cycles stop, fixed-length stop
and terminal control (see P07.04).