ICU Medical LifeCare PCA, Техническое и сервисное руководство, Страница: 18 / 148

SECTION 1 INTRODUCTION
LifeCare PCA 1 - 8 Technical Service Manual
1.10.4
SETTING THE TIME AND DATE
To set the time and date, see
Figure 1-2
, and proceed as follows:
1. Unlock and open the security door.
2. Press
[ON/OFF]
to turn on the power, and wait for the
SELF TEST COMPLETE
screen
to appear.
3. Press the
[SYSTEM SETTINGS]
softkey, then press the
[TIME/DATE]
softkey.
Note: If the infuser is running 7.02 software or higher, the Software Version screen
will display instead of the Self Test Complete screen, and will automatically
transition to the next screen after 5 seconds. Select SETTINGS> on this
screen to view the Select Setting to Change menu and press the
[TIME/
DATE]
softkey.
The screen displays
WARNING! CHANGING THE DATE OR TIME WILL CLEAR ALL
TOTALS!
4. Press the
[CONTINUE]
softkey.
5. Set the time using the keypad touchswitches. Press the
[AM/PM]
softkey to toggle
AM/PM.
Note: AM/PM option is available only in 12-hour clock format.
6. Press the
[NEXT]
softkey to continue.
7. Set the date using the keypad touchswitches, then press the
[NEXT]
softkey.
8. Press the
[CONFIRM]
softkey to accept current time and date settings, or press
[CHANGE]
to change time or date settings.
9. Verify the
SAVING DATE AND TIME
screen is displayed.
10. Verify the
SELECT SETTING TO CHANGE
screen is displayed.
11. Press the
[ON/OFF]
softkey when correct time and date are displayed.