ICU Medical LifeCare PCA, Техническое и сервисное руководство, Страница: 69 / 148

5.6 PERFORMANCE VERIFICATION TEST
Technical Service Manual 5 - 37 LifeCare PCA
To perform the self test, see
Figure 5-17
, and proceed as follows:
1. Verify the AC plug indicator on the front panel is lit
(see Figure 5-13)
.
Note: When the AC plug indicator is off and the battery indicator is flashing, it is
an indication that the infuser is operating on low battery power and should
be recharged.
2. Unlock and open the security door.
3. Press
[ON/OFF]
to turn on the power. The infuser will perform a self test verifying
the integrity of the software, memory, and selected electronic functions.
Note: If there is insufficient battery power for reliable operation, the infuser will
power itself off as soon as possible, without displaying an alarm message.
4. If a battery is not installed, press the
[CONTINUE]
softkey at the
BATTERY NOT
INSTALLED
message.
5. Verify
SELF TEST COMPLETE
displays.
Note: If the infuser is running 7.02 software or higher, the Software Version screen
will display instead of the Self Test Complete screen after the self test
passes. Select SETTINGS> on this screen to view the Select Setting to
Change menu. The infuser will automatically transition from the Software
Version screen to the next screen after 5 seconds.
6. Press the
[SYSTEM SETTINGS]
softkey, and verify the
SELECT SETTING TO CHANGE
screen appears.
7. Press the
[TIME/DATE]
softkey. The screen displays
ATTENTION! CHANGING THE
DATE OR TIME WILL CLEAR ALL TOTALS! .
8. Press
[CONTINUE]
.
9. Verify the time and date. To correct the time and date, see
Section 1.10.4
.
10. Press
[ON/OFF]
to turn off the device.
Figure 5-17. LifeCare PCA Self Test Screens
LifeCare PCA
SELF TEST
LifeCare PCA
SELF TEST
SOFTWARE
07.00.00.019
DRUG LIBRARY
DEFAULT
TIME: 11:13 AM
DATE: 07/21/14
SYSTEM
SETTINGS
CONTINUE
LifeCare PCA
SELF TEST
COMPLETE
RAM.............OK
FLASH..........OK
CPU ID.........OK
CPU..............OK
TIMER......... OK