IBM System x iDataPlex dx360 M4 7912, Руководство по обслуживанию

Страница: 77 / 400

1. Make sure that the fans are operating, that there
are no obstructions to the airflow (front and rear of
the server), that the air baffle is in place and
correctly installed, and that the server cover is
installed and completely closed.
2. Check the ambient temperature. You must be
operating within the specifications (see Server
Features and specifications for more information).
3. Make sure that the heat sink for GPUs installed
properly.
4. If you are using Intel GPU card, then replace both
GPU cards.
5. If you are using NVidia GPU card, then replace
GPU 1 card.
80010901-0b02ffff Numeric sensor
[NumericSensorElementName] going
high (upper critical) has asserted.
Explanation: This message is for the use case when
an implementation has detected an Upper Critical
sensor going high has asserted.
Internal Event: No
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0494
SNMP Trap ID: 0
Automatically notify Support: No
User response: If the specified sensor is one of the
following sensors, GPU 2 Temp, K10 2 Temp, K20 2
Temp, K20X 2 Temp, Mic 1 MEM Temp, Mic 2 MEM
Temp, VGX K1 2 Temp, VGX K2 2 Temp, complete the
following steps until the problem is solved:
1. Make sure that the fans are operating, that there
are no obstructions to the airflow (front and rear of
the server), that the air baffle is in place and
correctly installed, and that the server cover is
installed and completely closed.
2. Check the ambient temperature. You must be
operating within the specifications (see Server
Features and specifications for more information).
3. Make sure that the heat sink for GPU installed
properly.
4. If you are using Intel GPU card, then replace both
GPU cards.
5. If you are using NVidia GPU card, then replace
GPU 2 card.
80010901-0b03ffff Numeric sensor
[NumericSensorElementName] going
high (upper critical) has asserted.
Explanation: This message is for the use case when
an implementation has detected an Upper Critical
sensor going high has asserted.
Internal Event: No
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0494
SNMP Trap ID: 0
Automatically notify Support: No
User response: If the specified sensor is Mic 1 VR
Temp or Mic 2 VR Temp, complete the following steps
until the problem is solved:
1. Make sure that the fans are operating, that there
are no obstructions to the airflow (front and rear of
the server), that the air baffle is in place and
correctly installed, and that the server cover is
installed and completely closed.
2. Check the ambient temperature. You must be
operating within the specifications (see Server
Features and specifications for more information).
3. Make sure that the heat sink for GPUs installed
properly.
4. If you are using Intel GPU card, then replace both
GPU cards.
80010901-1001ffff Numeric sensor
[NumericSensorElementName] going
high (upper critical) has asserted.
Explanation: This message is for the use case when
an implementation has detected an Upper Critical
sensor going high has asserted.
Internal Event: No
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0494
SNMP Trap ID: 0
Automatically notify Support: No
User response: If the specified sensor is Paddle Card
Temp or Riser 1A Temp, complete the following steps
until the problem is solved:
1. Make sure that the fans are operating, that there
are no obstructions to the airflow (front and rear of
the server), that the air baffle is in place and
80010901-0b02ffff • 80010901-1001ffff
Chapter 3. Diagnostics
59