IBM System x iDataPlex dx360 M4 7912 страница 247 Скачать руководство пользователя

Страница: 247 / 400

Severity:

Warning

Serviceable:

Recoverable:

Automatically notify Support:

User response:

Complete the following steps:

1. Perform the actions mentioned one at a time and try

the test after each action.

2. If the problem remains, contact your

technical-service representative.

3. Turn off the system and disconnect it from power.

Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.

4. Make sure that DSA and BIOS/uEFI are at the latest

level.

Date Message Added:

09/04/2012

Reviewed:

09/04/2012

201-866-003 Standalone Memory Test Aborted

Explanation:

EFI-SAL Invalid parameter from

GetMemoryMap function.

Internal Event:

Severity:

Warning

Serviceable:

Recoverable:

Automatically notify Support:

User response:

Complete the following steps:

1. Perform the actions mentioned one at a time and try

the test after each action.

2. If the problem remains, contact your

technical-service representative.

3. Turn off the system and disconnect it from power.

Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.

4. Make sure that DSA and BIOS/uEFI are at the latest

level.

Date Message Added:

09/04/2012

Reviewed:

09/04/2012

201-867-000 Standalone Memory Test Aborted

Explanation:

EFI/SAL: Buffer not allocated.

Internal Event:

Severity:

Warning

Serviceable:

Recoverable:

Automatically notify Support:

User response:

Complete the following steps:

1. Perform the actions mentioned one at a time and try

the test after each action.

2. If the problem remains, contact your

technical-service representative.

3. Turn off the system and disconnect it from power.

Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.

4. Make sure that DSA and BIOS/uEFI are at the latest

level.

Date Message Added:

09/04/2012

Reviewed:

09/04/2012

201-867-001 Standalone Memory Test Aborted

Explanation:

EFI/SAL: Buffer not allocated.

Internal Event:

Severity:

Warning

Serviceable:

Recoverable:

Automatically notify Support:

User response:

Complete the following steps:

1. Perform the actions mentioned one at a time and try

the test after each action.

2. If the problem remains, contact your

technical-service representative.

3. Turn off the system and disconnect it from power.

Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.

4. Make sure that DSA and BIOS/uEFI are at the latest

level.

Date Message Added:

09/04/2012

Reviewed:

09/04/2012

201-867-002 Standalone Memory Test Aborted

Explanation:

EFI/SAL: Buffer not allocated.

Internal Event:

Severity:

Warning

Serviceable:

Recoverable:

Automatically notify Support:

User response:

Complete the following steps:

1. Perform the actions mentioned one at a time and try

the test after each action.

2. If the problem remains, contact your

technical-service representative.

3. Turn off the system and disconnect it from power.

Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.

201-866-003 • 201-867-002

Chapter 3. Diagnostics

229

Содержание System x iDataPlex dx360 M4 7912

















































































































































































































































































































































































































Результаты поиска

Содержание System x iDataPlex dx360 M4 7912

Отзывы:

Похожие инструкции для System x iDataPlex dx360 M4 7912

Бренды по названию

Популярные бренды

IBM System x iDataPlex dx360 M4 7912, Руководство по обслуживанию

Результаты поиска

Содержание System x iDataPlex dx360 M4 7912

Отзывы:

Похожие инструкции для System x iDataPlex dx360 M4 7912

Бренды по названию

Популярные бренды