IBM SAN32M-2, Инструкция по установке и обслуживанию

Страница: 21 / 312

xxiii About this book
• Connect and disconnect cables as described below when
installing, moving, or opening covers on this product or attached
devices.
To Disconnect:
1. Turn everything OFF (unless instructed otherwise).
2. Remove power cords from the outlet.
3. Remove signal cables from connectors.
4. Remove all cables from devices.
To Connect:
1. Turn everything OFF (unless instructed otherwise).
2. Attach all cables to devices.
3. Attach signal cables to connectors.
4. Attach power cords to outlet.
5. Turn device ON.
(D005)
Labels
As an added precaution, safety labels are often installed directly on
products or product components to warn of potential hazards. These
can be either danger or caution notices, depending upon the level of
the hazard.
The actual product safety labels may differ from these sample safety
labels:
DANGER
Hazardous voltage, current, or energy levels are present inside any
component that has this label attached.
(L001)
DANGER
Rack-mounted devices are not to be used as a shelf or work space.
(L002)