IBM SAN32M-2, Инструкция по установке и обслуживанию

Страница: 97 / 312

71 Chapter 2: Installation tasks
Figure 35
Configure Date and Time dialog box
2. To set date and time manually:
a. Click the Periodic Date/Time Synchronization check box to
deselect the option (no check mark). The greyed out Date and
Time fields activate.
b. Click the Date fields that require change, and type numbers in
the following ranges:
• Month ( MM ): 1 through 12 .
• Day ( DD ): 1 through 31 .
• Year ( YYYY ): greater than 1980 .
c. Click the Time fields that require change, and type numbers in
the following ranges:
• Hour ( HH ):
0
through
23
.
• Minute ( MM ): 0 through 59 .
• Second ( SS ):
0
through
59
.
d. Click Activate to set the switch date and time and close the
dialog box.
3. To set the product to periodically synchronize date and time with
the SAN management application:
a. Click the Periodic Date/Time Synchronization check box to select
the option. Date and Time fields are greyed out and not
selectable. Perform one of the following:
i24M1
168