IBM SAN32M-2, Инструкция по установке и обслуживанию

Страница: 116 / 312

SAN32M-2 Installation and Service Manual 90
NOTE: The default Windows user name is Administrator and the
default password is password . Both are case-sensitive.
g. Type the SAN management application default user ID and
password and select a server or IP address from the Network
Address drop-down list.
NOTE: The default user ID is Administrator and the default
password is password. Both are case-sensitive.
6. Click Login . The application opens and the SANavigator or EFCM
main window appears.
7. Remove the base restore CD from the CD-RW drive and store in a
safe location. Insert a blank rewritable CD into the CD-RW drive
and format the CD. Refer to
step 1 for formatting instructions.
8. Go to Task 20: Cable Fibre Channel ports .
Task 20: Cable Fibre Channel ports
Perform this task to cable Fibre Channel ports and connect devices:
1. Route fiber-optic jumper cables from customer-specified Fibre
Channel devices, FC-AL devices, or fabric elements to product
ports.
2. Connect device cables to SFP optical port transceivers as directed
by the customer.
3. Perform one of the following:
• If the product is installed on a table or desktop, bundle and
secure Fibre Channel cables as directed by the customer.
• If the product is installed in a customer-supplied equipment
rack, bundle Fibre Channel cables from the product and other
equipment (groups of 16 maximum), and secure them as
directed by the customer.
• If the product is installed in an equipment cabinet, bundle
Fibre Channel cables from the product and other equipment
(groups of 16 maximum), and secure them in the cable
management area at the front-left side of the cabinet.