IBM SAN32M-2, Инструкция по установке и обслуживанию

Страница: 210 / 312

SAN32M-2 Installation and Service Manual 184
2. At the Element Manager application (management server), select
Port Diagnostics from the Maintenance menu. The Port Diagnostics
dialog box displays ( Figure 59 ).
3. Type the port number to be tested or select all ports at the Port
Select area of the dialog box.
4. At the Diagnostics Test list box, select the Internal Loop option.
5. Click Next . The message Press START TEST to begin diagnostics
appears, and the Next button changes to a Start Test button.
Figure 59
Port Diagnostics dialog box
6. Click Start Test . The test begins and:
a. The Start Test button changes to a Stop Test button.
b. The message
Port xx: TEST RUNNING
appears.
c. A red progress bar (indicating percent completion) travels
from left to right across the Completion Status field.
7. When the test completes, results appear as Port xx: Passed! or
Port xx: Failed! in the message area of the dialog box.
8. When finished, click Cancel to close the Port Diagnostics dialog
box.
9. Reset the port:
a. At the Hardware View , right-click the port graphic. A pop-up
menu appears.
i1
6M2
01
8