IBM SAN32M-2, Инструкция по установке и обслуживанию

Страница: 127 / 312

101 Chapter 3: Maintenance analysis procedures
3
At the failed product, inspect the amber ERR LED and amber LEDs
associated Fibre Channel ports and CRUs.
Are any amber LEDs illuminated?
NO YES
↓
A CRU failure, power-on self-test (POST) failure, link
incident, interswitch link (ISL) problem, fenced E_Port, or
segmented E_Port is indicated. To obtain event codes that
identify the failure,
go to step 10 .
4
Is the product management interface (browser PC, management
server, or OSI host console) powered on and operational?
NO YES
↓
Go to step 7 .
5
Power on the management interface platform and launch the
associated management application:
• EFCM Basic Edition - Refer to Task 4: Configure product at the
EFCM Basic Edition interface (optional) for instructions.
• SAN management application - Refer to Task 6: Configure
server password and network addresses and Access the
management server desktop for instructions.
• OSI host console - Refer to documentation supplied with the
host system for instructions.
Was the maintenance action successful?
NO YES
↓
Go to step 7 .
6
Inspect the management interface for communication link failure.
Observe one of the following:
• A Page cannot be found , Unable to locate the server, HTTP
404 - file not found , or similar message (browser PC).