IBM SAN32M-2, Инструкция по установке и обслуживанию

Страница: 172 / 312

SAN32M-2 Installation and Service Manual 146
23
A zone merge process failed during ISL initialization. The following
list explains the reason:
• Reason 01 - An invalid data length condition caused an error in
a zone merge frame.
• Reason 08 - An invalid zone set format caused an error in a
zone merge frame.
• Reason F0 - A retry limit reached condition caused an error in a
zone merge frame.
• Reason F1 - An invalid response length condition caused an
error in a zone merge frame.
• Reason F2 - An invalid response code caused an error in a zone
merge frame.
Disconnect the fiber-optic jumper cable from the E_Port reporting the
problem, then reconnect the cable to the same port.
Was the maintenance action successful?
NO YES
↓
The fabric, ISL, and product are operational. Exit MAP.
Perform a data collection and contact the next level of support. Refer
to
Collect maintenance data (EFCM Basic Edition) or Collect
maintenance data (Element Manager). Exit MAP.
Table 20
Fabric merge failure reasons and actions
Bytes 8 - 11 Merge failure reason Action
01 Invalid data length. Go to step 23 .
08 Invalid zone set format. Go to step 23 .
09 Invalid data. Go to step 24 .
0A Cannot merge. Go to step 24 .
F0 Retry limit reached. Go to step 23 .
F1 Invalid response length. Go to step 23 .
F2 Invalid response code. Go to step 23 .