IBM SAN32M-2, Инструкция по установке и обслуживанию

Страница: 187 / 312

161 Chapter 4: Repair information
Inspect POM data
At the Port List View , click the entry for a port in the Health Status
column. POM data for the selected port appears in the lower panel of
the view (
Figure 48 ):
• Port Number - Product port number.
• Health Status - Condition of the installed optical transceiver
( Normal , Warning , Alarm , or No Info ).
• Transceiver Type - Installed transceiver type ( SFP , XFP , or
Unknown ).
If the port has a digital diagnostics (DD) enabled optical transceiver
installed, product firmware displays a table of reported temperature,
voltage, current, transceiver power, and receiver power. Optical
transceivers also provide vendor-specific threshold values for these
parameters.
Inspect port transceiver technology
At the Port List View , click the entry for a port in the Transceiver
column. Port transceiver technology information for the selected port
appears in the lower panel of the view:
• Port Number - Product port number.
• Identifier - Installed transceiver type ( SFP , XFP , or Unknown ).
• Connector type - Type of port connector ( LC , MT_RJ , MU ,
Unknown , or Internal Port ).
• Transceiver - Type of port transceiver ( Shortwave Laser , Longwave
Laser , Long Distance Laser , Unknown , or None ).
• Distance Capability - Port transmission distance ( Short ,
Intermediate , Long , Very Long , or Unknown ).
• Media - Type of optical cable used ( Singlemode , multimode
50-micron , multimode 62.5-micron , or Unknown ).
• Speed - Operating speed ( Not Established , 1 Gbps , 2 Gbps ,
or 4 Gbps ).
Performance View
The EFCM Basic Edition interface provides access to port statistics
information through the
Performance View . To open this view, select
Performance from the Product menu at any other view. The following
statistical information appears: