IBM SAN32M-2, Инструкция по установке и обслуживанию

Страница: 98 / 312

SAN32M-2 Installation and Service Manual 72
• Click Activate to enable synchronization and close the
dialog box. Product date and time synchronize with the
SAN management application date and time at the next
update period (at least once daily).
• Click Sync Now to synchronize the product and SAN
management application immediately. The Date and Time
Synced information dialog box displays. Click OK to
synchronize the date and time and close the dialog box,
then click
Activate to enable synchronization and close the
Configure Date and Time dialog box.
Task 18: Configure the Element Manager application
To configure the Element Manager application, selectively perform
the following tasks according to customer requirements:
• Product - includes identification, product parameters, and fabric
parameters.
• Ports - includes basic information, buffer-to-buffer credits
(BB_Credits), and N_Port identifier virtualization (NPIV).
• Management - includes SNMP trap message recipients; threshold
alerts; EFCM Basic Edition interface access; Telnet access; and
e-mail, Ethernet event, and call-home event notification.
• Security - includes SANtegrity authentication, Enterprise Fabric
Mode, and SANtegrity binding.
• Interswitch links - includes OpenTrunking, preferred path, and
ISL port fencing.
Configure product identification
Perform this procedure to configure the product identification. The
Name , Location , and Contact variables correspond respectively to the
SNMP variables sysName , sysLocation , and sysContact , and are used by
management workstations when obtaining product data.
1. Select Identification from the Configure menu at any view. The
Configure Identification dialog box displays ( Figure 36 ).